crevice corrosion

英 [ˈkrevɪs kəˈrəʊʒn] 美 [ˈkrevɪs kəˈroʊʒn]

缝隙腐蚀;裂隙腐蚀;接触腐蚀

化学



双语例句

  1. Study of the Crevice Corrosion of Carbon Steel and Current Oscillations of Iron by Numerical Reconstruction of Digital Holograms
    数字全息术研究碳钢的缝隙腐蚀和铁的阳极电化学振荡
  2. Stainless steels& Method of ferric chloride crevice corrosion test
    GB/T10127-1988不锈钢三氯化铁缝隙腐蚀试验方法
  3. Stainless steels-Method of electrochemical test for crevice corrosion
    GB/T13671-1992不锈钢缝隙腐蚀电化学试验方法
  4. Crevice corrosion test for stainless steel
    不锈钢缝隙腐蚀试验
  5. Mechanism Analysis of the Crevice Corrosion of Liquid Chlorine Steel Cylinders and Protection Methods
    液氯钢瓶缝隙腐蚀的机理分析及防范措施
  6. This process was coincident with classic theory of crevice corrosion of metal.
    这一过程与经典的金属缝隙腐蚀机理相吻合。
  7. Research on Inhibitors for the Crevice Corrosion and Mechanism of Two Aluminium Alloys in Seawater
    海洋环境中两种铝合金缝隙腐蚀缓蚀剂及缓蚀机理的研究
  8. Results showed that corrosion potential moved negatively till the lowest value was reached and kept stable during the procedure of copper crevice corrosion.
    结果表明,铜发生缝隙腐蚀的过程中,金属腐蚀电位朝负移动,至一最低值并保持不变。
  9. According to the investigation of the general environmental factor, we can understand the crevice corrosion of stainless steel deeply, and prevent it easily.
    环境综合影响因素的研究为更好的了解及预防不锈钢缝隙腐蚀提供了依据。
  10. After exposure in Xiamen tide station for 4a, the alloy locally generated crevice corrosion by marine biofouling.
    但在厦门站潮差区暴露4a后,由于特殊的海水环境和试验设施,该合金局部发生海生物附着下的缝隙腐蚀。
  11. Crevice Corrosion Behavior of Titanium
    钛的缝隙腐蚀行为研究
  12. Using accelerated chemical and electrochemical corrosion testing methods, the resistance to pitting and crevice corrosion behavior for six stainless steels were evaluated.
    采用化学和电化学加速腐蚀试验方法对6种不锈钢的耐点蚀和缝隙腐蚀性能进行了评价。
  13. The coating corrosion was pitting corrosion in HCl solution and crevice corrosion in H_2SO_4, H_3PO4 and FeCl_3 solutions.
    镀层在HCl溶液中的腐蚀属于点蚀,在H2SO4、H3PO4和FeCl3溶液中的腐蚀属于缝隙腐蚀。
  14. The stainless steels exposed to tidal zone were attacked by pitting and crevice corrosion.
    在潮汐区暴露的不锈钢受点蚀和缝隙腐蚀破坏。
  15. The occurring of crevice corrosion is attributed to the metal ions concentration cell.
    缝隙腐蚀的发生是由于形成了金属离子浓差电池。
  16. Crevice Corrosion of Stainless Steel Seal Surface in Acetic Acid and Countermeasures
    不锈钢密封面在醋酸中的缝隙腐蚀及对策
  17. Under unprotection condition, crevice corrosion can happen and the pH value of solution reduces in the crevice;
    欠保护状态下,缝隙腐蚀会发生,缝隙内溶液pH值降低;
  18. The stainless steel that had good pitting resistance in tidal zone possessed good resistance to crevice corrosion.
    耐点蚀性能较好的不锈钢,耐缝隙腐蚀性能也较好。
  19. 304 and 430 stainless steels exposed to field brine suffered light pitting and crevice corrosion.
    304和430不锈钢在卤水中有较轻的蚀斑和缝隙腐蚀。
  20. Anticorrosion measures for combinational type of galvanic corrosion with crevice corrosion
    缝隙腐蚀与电偶腐蚀的混合型腐蚀形态与防腐措施
  21. Influence of iron as alloying element on crevice corrosion behavior of titanium
    合金元素铁对钛缝隙腐蚀性能的影响
  22. The crevice corrosion of the benzotriazole ( BTA) passive specimens of the shape memory alloy Cu Zn Al in Hank's artificial body fluid has been studied using electrochemical tests.
    采用电化学方法研究了Cu-Zn-Al形状记忆合金及其BTA钝化处理试样在Hank's人工体液中的缝隙腐蚀行为。
  23. Pitting corrosion and crevice corrosion in catalyst deposit zone and corrosion deposit zone can also induce stress corrosion cracking.
    催化剂沉积区和腐蚀产物沉积区产生的点蚀和缝隙腐蚀会诱发应力腐蚀开裂的产生。
  24. It was found that the pitting and crevice corrosion of steel wires were the main forms of corrosion.
    发现70钢丝的缝隙腐蚀和点蚀是钢丝绳的主要腐蚀形式。
  25. The Pitting Corrosion and Crevice Corrosion
    小孔与缝隙腐蚀
  26. Crevice corrosion of aluminium alloys in splash zone was more serious than pitting.
    铝合金在飞溅区的缝隙腐蚀比点蚀严重。
  27. The installation of filter or selection duplex stainless steel or super austenitic steel are suggested to prevent the crevice corrosion.
    通过宏观检验、理化检验和扫描电子显微分析,得出失效原因为缝隙腐蚀,并提出了增设过滤器或选用双相不锈钢及超级奥氏体不锈钢等防止缝隙腐蚀的建议。
  28. Austenitic stainless steel were widely used in contact with the chloride solution environment, because it has excellent pitting and crevice corrosion resistance.
    奥氏体不锈钢具有良好的耐点蚀和缝隙腐蚀性能,在与氯离子接触的环境中有着广泛的应用。
  29. If there is a gap between the pipe and dirt, a obvious of crevice corrosion ( pitting) should be seen On the rupture position.
    如果在管和污垢层之间有一个缝隙,那在产生破裂的位置就会有应该有明显的缝隙腐蚀(点蚀)痕迹。